6" DELUXE HAND JOINTER
Micro-adjust handwheel type
 |  |
| 10J0101 Floor type | 10J0102 Cabinet stand |
 |  |
| 10J0103 Open stand | |
* New center fence construction.
* 1/8" edge rabbeting is supplied.
* Newly designed 0~1/8" stop pin block prevents planing more than 1/8" depth.
* Micro-adjust handwheel for infeed table.
* Fence is tilted by a single lever control.
* Extra long 6" fence moving range.
* Aluminum cutterhead guard provides full coverage of the entire cutterhead at all times.
* 1160 x 191mm table provides firm support for large workpieces.
* Fence tilts 45o right and left for beveling and chamfering operations.
* The infeed and outfeed table moves on dovetailed ways.
* Front and rear cutterhead guard.
* UL / CSA removable key switch prevents unauthorized operation.
 |  |  |
| Newly designed 0~1/8" stop pin & micro-adjust handwheel for infeed table | Fence tilts 45degree rightward | Fence positions at 90 degree |
 |  |  |
| Fence tilts 45degree leftward | 4" dia. Plastic dust chute on model 10J0101 | 4" dia. plastic dust chute on model 10J0102 |
 |
| 4" dia. Steel dust chute on model 10J0103 |
6" DELUXE HAND JOINTER
Convenient Quick Lever Type
 |  |
| 10J0104 Floor type | 10J0105 Cabinet stand |
 |  |
| 10J0106 Open stand | |
* New center fence construction.
* 1/8" edge rabbeting is supplied.
* Newly designed 0~1/8" stop pin block prevents planing more than 1/8" depth.
* Quick lever for convenient infeed table adjustment.
* Fence is tilted by a single lever control.
* Extra long 6" fence moving range.
* Aluminum cutterhead guard provides full coverage of the entire cutterhead at all times.
* 1160 x 191mm table provides firm support for large workpieces.
* Fence tilts 45degree right and left for beveling and chamfering operations.
* Front and rear cutterhead guard.
* The infeed and outfeed table moves on dovetailed ways.
* UL/CSA removable key switch prevents unauthorized operation.
 |  |  |
| Newly designed 0~1/8" stop pin block and quick lever adjustment for infeed table | Fence tilts 45degree rightward | Fence positions at 90 degree |
 |  |  |
| Fence tilts 45degree leftward | 4" dia. Plastic dust chute on model 10J0104 | 4" dia. plastic dust chute on model 10J0105 |
 |
| 4" dia. steel dust chute on model 10J0106 |
6" DELUXE HAND JOINTER
Convenient Quick Lever Type
 |  |
| Convenient fence tilting by a single lever control | Removable key switch |
* 1/8" edge rabbeting.
* A swing type cutterhead guard provides full coverage of the entire cutterhead at all times.
* A single lever conveniently controls fence tilting.
* 42" long table provides full support for long workpieces.
* Fence tilts 45degree right and left for beveling and chamfering operations.
* Fence has positive stops at 45degree and 90 degree.
* The cutterhead guard tension is adjustable.
* The infeed and outfeed table moves on dovetailed ways.
* UL / CSA removable key switch prevents unauthorized operation.
* Built-in dust chute is optional.
8" DELUXE HAND JOINTER
 |  |  |  |
| Micrometric adjustment handwheel for infeed table | Fence positions at 90 degree | Fence tilts 45 degree rightward | Fence tilts 45 degree leftward |
* Cabinet type floor stand.
* A swing type cutterhead guard provides full coverage of the entire cutterhead at all times.
* 64" long table provides firm support for large workpieces.
* Fence tilts 45degree right and left for beveling and chamfering operation.
* Fence has positive stops at 45 degree and 90 degree.
* Front and rear cutterhead guards.
* The infeed and outfeed table moves on dovetailed ways.
* Magnetic switch provides overload protection.(Optional).
